WIA Miller 305001 Vortex HDV PAPR Welding Helmet
Package Includes:
- Blower Assembly Gen2 - HEPA filter, Prefilter, Spark guard
- Prefilters (x6)
- Breathing tube
- Breathing tube cover
- Padded belt
- Shoulder straps
- Lithium-ion batteries (x2)
- Battery charger
- Battery charger supply cable with AU plug
- PAPR owner manual
- Flowmeter
- Carry bag
- Ultra HDV helmet assembly
- Spare HDV front cover lens (x2)
- Spare HDV grind shield (x2)
- Spare cover lens inside (x2)
- Helmet owner manual
- Tear away grind shield (x2)
Features:
- Lightweight Lithium-Ion Battery - Provides long battery life (up to ten hours on low speed) with no memory retention from frequent charging (three-four charge cycle).
- 3 Air Speeds - Low, Medium and High - Allows users to adjust the volume of air to maximise comfort in varied work conditions.
- Lightweight Lithium-Ion Battery - Provides long battery life (up to ten hours on low speed) with no memory retention from frequent charging (three-four charge cycle).
- Patent-Pending Dualtec Manifold System - Optimises helmet balance and sound, while 6-point air distribution system maximises cooling through targeted air placement.
- Integrated 3-Point Back-Pack Style Shoulder Straps - Enhances comfort, reduces fatigue over long shifts by distributing system weight to alleviate back pain.
- Quick-Release Belt Design - Allows for seamless system on/off.
- Lightweight Low-Profile Blower Design (1362GM) - Extends wear-ability without interfering with surroundings
- LCD Display - Allows users to see fan speed, filter time, battery level and current time.
- Filter Timer = Tracks how many hours of use the filter has.
- Audible and Vibrating Alarm - Notifies users in noisy environments of low battery due to reduced airflow.
PAPR Specifications:
- Size (Blower Assembly) - 210 x 178 x 76 mm
- Weight (Blower Assembly, Filters, Belt Shoulder Straps and Battery) - 1362 gm
- Air Filter Assembly - Spark guard screen, foam prefilter, and particulate (HEPA) filter - down to 0.3 micrometers in size
- Air Flow -
- Low Speed: 6.18+ CFM (175+ LPM)
- Medium Speed: 6.89+ CFM (195 LPM)
- High Speed: 7.59 CFM (215 LPM)
- Operating Temperature: -5 to 55° C
- Storage Temperature: -10 to 80° C
- Battery Type - Rechargeable lithium 14.8V, 3A
- Battery Charging Time - About 3 hours
- Battery Life - 500 charges - run time dependent on air flow rate and filter load
- Belt Size - 711 to 1397 mm
- Standards - AS/NZS 1716.2012
- Protection Level - Class 2 particulate filter meets AS/NZ1716:2012 standards
- Warranty - 1 Year Warranty (Blower Unit)
Ultra HDV Helmet Specifications:
- Viewing Area - 97 x 60 mm
- Cartridge Size - 114 x 120 x 9.5 mm
- Modes -
- X-Mode - Shade 8 - 12.5
- Grind Mode - Shade 2.5
- Cut Mode - Shade 5 - 8
- Weld Mode - Shade 8 - 12.5
- Switching Speed (Light to Dark) - 1/25,000 sec
- Delay Speed (Dark to Light) - 0.1 - 1.0 sec
- Arc Sensors - 4
- Optical Grade - EN379 1/1/1/2
- Weight - 709g
- Power - CR2450 lithium battery and solar assist
- On/Off Control - Automatic on, off after 45 minutes
- Operating Temperature: -10 to 55° C
- Australian Standards -
- AS/NZS 1338.1 (Auto-Darkening)
- AS/NZS 1337.1B (High Impact)
- Warranty - 3 Years (Auto-Darkening lens only)
No Size Guide Available
If you are looking for more information, feel free to email us.
sales@tasweld.net